Thursday, March 19, 2009
No-till Those Soybeans!
The wet 2008 fall put a hold on tillage operations for many farmers, which has given them with time to consider the use of no-tillage system for soybean after corn. Conventional tillage, whether for corn or soybean, generally has shown limited advantage in yield and economic returns.
The exception is a few cases with corn that involve lack of drainage and wet, cold soil conditions. Those problems have been taken care of by innovative farmers who are continuous notill regardless of soil challenges.
As preparations for spring field operations get underway, producers need to stop and think about their tillage system choices. Especially given the costs associated with conventional tillage operations – labor, fuel and equipment just to name few. Primary tillage, such as a chisel plow or deep ripping, often requires 1 to 1.5 gallons of fuel per acre, or more, than a no-till system. A secondary tillage pass through the field with a field cultivator or disk may use 0.5 to 0.7 gallon of fuel per acre.
These additional fuel costs for tillage operations, in addition to other input costs, make no-tillage, a far better choice given the insignificant soybean yield differences across all tillage systems. In addition, demands on farm labor this spring may be greater than normal due to the late 2008 harvest.
Research shows advantages to changing tillage practices so farmers who didn’t complete tillage on corn stalks last fall need to have an important question answered. Are tillage operations really needed for soybean crop following corn? If the response to this question is based on yield improvement – the answer is no.
Research across the country shows NO advantage of tilling cornstalks and never enough yield increase to pay the tillage costs. Factor in advantages to soil improvement characteristics and notill is the clear choice.
70% of farmers have figured this out and will no-till their soybeans in the country this year. Still, 30% plan some kind of tillage and only 24% no-till corn. We have a ways to go with our educational efforts!
The results of the past 6 years ot so show soybean yields are not significantly different for all tillage systems at all locations. In addition, the input cost of conventional tillage system for soybean production is approximately $18 – $25 per acre more than no-till. We find that the increase in soybean yield in most cases for conventional tillage systems does not exceed 1 bushel per acre over no-till. In addition to the economic and yield advantages for soybean production with no-till over conventional tillage, there is also significant environmental benefits associated with no-till in term of improving soil organic matter, soil quality and water quality.
The argument for tilling corn residue to improve organic matter is unsupported by research. Studies have shown that incorporating residue with intensive tillage will do more damage. This practice accelerates the loss of soil organic matter by mineralizing organic matter and altering microbial activities. The benefits to the soil from incorporating residue are far less than the damages caused by degrading the soil's organic matter. There also is a greater potential loss of organic matter associated with conventional tillage due to the risk of soil erosion. In a no-tillage system, residue can decompose slowly and release nutrients more efficiently into the soil system for crop use.
In summary, tilling corn residue for the soybean crop year does not improve soybean yield. There may be some challenges in managing corn residue, but simple modification of the planter to include residue cleaners, heavier down pressure springs, or other residue management attachments are far more cost effective than the expense associated with conventional tillage.
No-till those soybeans and don't forget to plan for inoculation! The benefits are too great not to!